Главная / Новости / Новости

What is the Role of Dispersant?

Jun. 16, 2021

The role of the dispersant is to use a wetting and dispersing agent to reduce the time and energy required to complete the dispersion process, stabilize the dispersed pigment dispersion, modify the surface properties of the pigment particles, and adjust the mobility of the pigment particles. It is embodied in the following aspects:

Ashless Dispersant

Ashless Dispersant

1. Improve gloss and increase leveling effect. The actual gloss is mainly determined by the scattering of light on the surface of the coating (that is, a certain level of flatness. Of course, testing equipment is needed to determine whether it is flat enough, not only the number and shape of the primary particles, but also their Combination method), when the particle size is less than 1/2 of the incident light (this value is uncertain), it will appear as refracted light, and the gloss will not increase. Similarly, the hiding power that depends on scattering to provide the main hiding power will not increase ( In addition to carbon black, it mainly depends on absorbing light, organic pigments forget). Note: The incident light refers to the range of visible light. The leveling is not good; but pay attention to the reduction of the original number of particles to reduce the structural viscosity, but the increase in the specific surface will reduce the number of free resins. Whether there is a balance point is not good. But generally the leveling of powder coatings is not as fine as possible.

2. Prevent floating color and blooming.

3. Improve tinting strength. Note that tinting strength is not the higher the better in the automatic tinting system.

4. Reduce viscosity and increase pigment loading.

5. This is the way to reduce flocculation, but the finer the particle, the higher the surface energy, and the higher the adsorption strength of the dispersant is needed, but the dispersant with too high adsorption strength may cause disadvantages to the performance of the coating film.

6. In fact, the reasons for increasing storage stability are similar to the above. Once the stability of the dispersant is not strong enough, the storage stability will deteriorate (of course, it is no problem from your picture).

7. Increase color development, increase color saturation, increase transparency (organic pigments) or hiding power (inorganic pigments).

Our company also has Ashless Dispersant on sale, welcome to contact us.

Продукция с широким сбытом
Серия полиолов Серия полиолов
Серия ПЭА-полиэфираминов Серия ПЭА-полиэфираминов
Огнезащитные составы и катализатор Огнезащитные составы и катализатор
Полиэстер Плиолс Полиэстер Плиолс
+86 156 3251 6851 +86 150 7632 3255 15033233665 gilbert@houfa-polyurethane.com  james@houfa-newmaterials.com 313011414 1144651831